DUAL XDM17BT INSTALLATION & OWNER'S MANUAL Pdf Download (2024)

FAQs

What is the password for dual xdm17bt? ›

The Bluetooth passcode is "1234”. Note: The head unit can be in any mode of operation when pairing is performed.

Refer to the owner's manual for your device for more details. The device name is “Dual Media Player”. The Bluetooth passcode is "1234”. Note: If passcode "1234" does not pair your device to the receiver, use passcode "0000".

Press the voice activation button, and the receiver will switch into Bluetooth mode, This will activate Siri® or Google Assistant™ on your smartphone.

Insert a 3.5mm cable in the unit's front AUX port. Press the RESET button to reset the unit back to the factory settings if abnormal operation occurs. The reset button is located on the front panel.

Dual iPlug S is an app designed to control certain Dual brand radios. It can select from 4 different sources; Radio mode, USB mode, Bluetooth music mode and AUX mode via Bluetooth control. - Radio mode on the APP allows you to scan and store radio stations or select your favorite radio station via the radio presets.

The reset hole is located under the volume knob of the front panel. With the unit on, press and hold DISP until the clock begins to flash, then release.

If a passkey* is required on the display of the BLUETOOTH device, enter “0000.” A passkey may be called “Passcode”, “PIN code”, “PIN number” or “Password.”

3 Navigate to and select the Self Diagnosis option. 4 Navigate to and select the Reset option. 5 Enter your PIN (the default PIN is 0000).

There are a few apps that connect multiple Bluetooth devices, including AmpMe, Bose Connect, and Ultimate Ears. AmpMe is the most versatile, as it's not brand-specific, while the Bose and Ultimate Ears apps require the respective company's Bluetooth speakers.

Can I pair 2 Bluetooth devices at once? ›

Most smartphones, TVs and computers and tablets manufactured since 2017 have Bluetooth 5.0 technology, which can connect up to seven different Bluetooth devices at once.

Dual Pairing is a popular and advanced Bluetooth feature that comes with the latest wireless headsets nowadays. It enables you to connect your laptop/PC and smartphone simultaneously with the headset. Depending on the audio source, you can switch between the two connected devices to enjoy seamless usage.

Dual-Mode Bluetooth devices are those that support both Bluetooth Classic and Bluetooth Low Energy (BLE). Bluetooth Classic provides a high throughput two-way communication link (up to 2.1 Mbps).

Wire It In

If your vehicle comes with an auxiliary (AUX) input, then you can also choose to wire in a Bluetooth adapter. Simply plug the adapter into the input, select AUX on your head unit, feed it power (via 12-volt or USB), and you can stream music directly from your phone.

Most BT-enabled speakers I've seen use a default code like 0000 or 1234, and don't allow it to be changed. However, for initial pairing and also once paired with a device they generally require a physical button to be pressed to switch to discovery mode.

1. Power up the adapter, it is recommended to use the charging-only port. 2. Connect the dongle's wifi, the password is "88888888".

If you're not seeing your OBD adapter in the list of Bluetooth devices that Carista shows, try pairing with it manually in your Android Bluetooth settings first (the PIN is usually 1234 or 0000).