Easy Peanut Brittle Recipe (2024)

Published on | Updated on by Melissa

This post may contain affiliate links meaning if you buy from them, I will make a few pennies, at no cost to you. See disclosurehere.

This easy peanut brittle recipe is golden, buttery, and perfect as a treat or to package up for holiday gifts. This homemade candy is salty and sweet and only has six ingredients!

Easy Peanut Brittle Recipe (1)

How to make Peanut Brittle

Homemade candy is a favorite during the holiday season – hard candy, crockpot peanut clusters, peanut butter fudge, and this old fashioned peanut brittle recipe.

I loved Planters Peanut Bars when I was little but I don’t think they make them anymore. This peanut brittle is similar and so easy to make yourself!

You do need to use a candy thermometer but don’t let that intimidate you. You’ll be fine as long as you don’t get distracted (speaking from experience).

Easy Peanut Brittle Recipe (2)

Why you’ll love this Easy Homemade Peanut Brittle

Easy Recipe – Candy making doesn’t have to be intimidating, this one is a breeze! Even if this is your first time making candy, you’ll be fine.

Simple Ingredients – You only need a handful of ingredients, six to be exact, that you likely already have on hand.

Family Favorite – This candy recipe is great any time of year but makes a great holiday gift if you bag it up into treat bags to pass out.

Equipment you’ll need

  • Baking Sheet – Use a lipped baking sheet to keep the peanut brittle on the pan.
  • Candy Thermometer – Nothing fancy, you just need a basic one, but it is helpful to have a clip to hook to the pot.
  • Silicone Spatulas – I use these for everything in the kitchen.

Ingredients

Below is a list of the ingredients you’ll need to gather to make this recipe.Scroll all the way down for the full recipe card.

  • SUGAR – Granulated white sugar.
  • CORN SYRUP – Use light corn syrup. I use Karo syrup.
  • WATER
  • BUTTER – Unsalted butter, cubed.
  • BAKING SODA – The baking soda creates a chemical reaction causing little air bubbles to form. The candy becomes porous and brittle, making it easy to break into pieces.
  • PEANUTS – I like to use roasted peanuts for flavor but raw spanish peanuts were traditionally used.
Easy Peanut Brittle Recipe (3)

How to make peanut brittle

This brittle candy is so easy to make, but it does require you to watch the temperature so don’t get distracted!

  1. STEP ONE: Grab a large cookie sheet with sides (like a jelly roll pan) and cover it with foil. Spray with nonstick cooking spray and set aside.
  2. STEP TWO: Stir together the sugar, corn syrup, and water in a medium saucepan. Bring the mixture to a boil and continue to boil until the temperature reaches 340 degrees F. It should be golden brown after about 15 minutes.
  3. STEP THREE: Remove the pan from the heat and add butter and baking soda. It will bubble up (that’s the chemical reaction) so work quickly stirring with a silicone spatula until smooth.
  4. STEP FOUR: Pour in the peanuts and stir to evenly distribute. Quickly pour the peanut brittle mixture onto the lined baking pan and spread it evenly into a thin layer.
  5. STEP FIVE: Let the candy harden, at room temperature (about 30 minutes), and then break into pieces and store in an airtight container.
Easy Peanut Brittle Recipe (4)

Which types of nuts should I use?

Peanuts are the classic choice to use in nut brittle. Roasted peanuts have great flavor. Raw Spanish peanuts were traditionally used but either work. You could also use almonds, cashews, macadamia nuts, pecans…just about any will work.

What does baking soda do to peanut brittle?

Baking soda might seem like an odd addition to the peanut brittle and not everyone adds it, but baking soda creates a chemical reaction that creates little air bubbles. It is added once the sugar mixture has cooked down and becomes acidic. The candy becomes porous and brittle, making it easy to break into smaller pieces.

Easy Peanut Brittle Recipe (6)

Why is my peanut brittle chewy?

There is where the candy thermometer becomes important. The biggest reason your peanut brittle is chewy and sticky is because you didn’t cook it long enough. It’s not something you can guess at, you need it to reach the hard crack stage. that means the strands of sugar break easily and feel dry, as opposed to sticky.

If you take it off the heat too soon, it doesn’t set up and makes a sticky mess, but let it cook too long and it becomes scorched and bitter.

Another possible cause might be humidity in the air.You should store finished peanut brittle in an airtight container so humidity doesn’t get to it.

Easy Peanut Brittle Recipe (7)

How long is it good for?

When stored in an airtight container, at room temperature, peanut brittle will keep for 6-8 weeks. Do not put it in the fridge as it as the moisture will cause the brittle to soften.

Itcan also be frozen and stored up to 3 months.

Need more homemade candy recipes? Try these:

Christmas Oreo Bon Bons
Grinch Christmas Cream Cheese MintsCrockpot Salted Caramel Fudge
Peanut Butter Balls
Crockpot Cinnamon Sugar Candied Almonds
Christmas “Crack”
Candied Pecans
Crockpot Candy

Click here to view my entire collection of candy recipes.

Easy Peanut Brittle Recipe (8)

Connect with Persnickety Plates!

Follow along on my social media so you never miss a post!

I made a fun group on Facebook for sharing recipes, asking questions, and talking about food. I’d love to have you! Request to join HERE.

Also, sign up to receive an email in your inbox for each new recipe:

FREE EMAIL SUBSCRIPTION & EBOOK

Easy Peanut Brittle Recipe (9)

Easy Peanut Brittle Recipe

Melissa Williams | Persnickety Plates

This easy peanut brittle recipe is golden, buttery, and perfect as a treat or to package up for holiday gifts. This homemade candy is salty and sweet and only has six ingredients!

4.78 from 18 votes

Print Recipe Pin Recipe Rate Recipe Save

Prep Time 5 minutes mins

Cook Time 20 minutes mins

Harden Time 30 minutes mins

Total Time 55 minutes mins

Course Dessert, Snack

Cuisine American

Servings 10 servings

Calories 390 kcal

Ingredients

  • 2 cups granulated sugar
  • ½ cup light corn syrup
  • ½ cup water
  • 6 Tablespoons unsalted butter cubed
  • ½ teaspoon baking soda
  • 1 ½ cups roasted peanuts

Instructions

  • Line a lipped baking sheet with foil and spray with non-stick spray. Set aside.

  • To a medium saucepan, add the sugar, corn syrup, and water. Add in the candy thermometer to the pan making sure it touches the mixture but not the bottom of the pan. Bring the mixture to a boil over medium heat and then continue to boil until the mixture is golden brown and reaches 340 degrees. This should take about 15 minutes.

  • Remove the pan from the heat and quickly stir in the butter and baking soda until smooth. Then stir in the peanuts until evenly distributed.

  • Pour the mixture onto the prepared baking sheet and spread evenly with a silicone spoon, working quickly, as it will start to set.

  • Let harden at room temperature, about 30 minutes, and then break up into pieces.

Notes

Use a candy thermometer to make sure your sugar mixture reaches 340 degrees. Hook the thermometer to the side of the pan so it touches the mixture but not the bottom of the pan.

Store in an airtight container.

Nutrition

Serving: 1gCalories: 390kcalCarbohydrates: 57gProtein: 6gFat: 18gSaturated Fat: 6gCholesterol: 18mgSodium: 170mgPotassium: 170mgFiber: 2gSugar: 53gVitamin A: 210IUCalcium: 26mgIron: 1mg

Nutritional information is an estimate and provided to you as a courtesy. You should calculate the nutritional information with the actual ingredients used in your recipe using your preferred nutrition calculator.

Tried this recipe? Tag me!Mention @melissa_pplates or tag #persnicketyplates!

Sharing of this recipe is both encouraged and appreciated. Copying/pasting and/or screenshots of full recipes to any social media is strictly prohibited. Content and photographs are copyright protected.

Originally published December 13, 2020.

This recipe first appeared on Yellow Bliss Road.

Easy Peanut Brittle Recipe (2024)

FAQs

Why put baking soda in peanut brittle? ›

Baking soda is a key ingredient in peanut brittle. It's what aerates the candy, giving it a nice light crunch. Why didn't my homemade peanut brittle get hard? The main reason why peanut brittle doesn't get hard and have the crunch we expect is because the sugar was not cooked long enough.

Is peanut brittle good or bad for you? ›

Peanut brittle has one redeeming quality: peanuts. Outside of that single ingredient, peanut brittle is painfully unhealthy. It contains: sugar, corn syrup, and butter, all of which are unhealthy for your body in different ways.

How to keep peanut brittle crunchy? ›

The candy will attract moisture from the air, making it unpleasantly sticky instead of shatteringly crisp. Once it's completely cool, transfer it to an airtight container.

Why doesn t peanut brittle harden? ›

Why didn't my homemade peanut brittle get hard? Same answer as the question above. If your peanut brittle is not hardening, it's because the sugar mixture did not get hot enough to properly caramelize, cool and become hard, crisp and crunchy.

Why is my peanut brittle hard but sticky? ›

As we said, the biggest enemy to the longevity of your peanut brittle is moisture. Whether it's during the cooking, cooling, or storage process, moisture and humidity can ruin the best batch of brittle in minutes, leaving you with a soggy, sticky mess.

Why is my peanut brittle not airy? ›

The mixture will foam and grow so make sure to stir constantly to completely incorporate. Working quickly, pour into prepared 10×15 pan. To keep the brittle light and airy, do not spread or flatten the mixture. Instead, let it flow freely.

Why is my homemade peanut brittle chewy? ›

Why did my peanut brittle turn out chewy? The likely cause is that the sugar mixture didn't reach the proper hard crack stage temperature. Ensuring it reaches 300˚F is key to getting that classic brittle texture.

Should homemade peanut brittle be refrigerated? ›

Making Ahead, Storing and Freezing Peanut Brittle:

To store: Once it's completely cooled, store peanut brittle in an airtight container at room temperature. Do not refrigerate as the moisture from the fridge will cause the brittle to soften. Store for 6-8 weeks.

Why is my peanut brittle bitter? ›

Those other liquid sugars have impurities that will burn at the higher temperature of making caramel, leading to a bitter-tasting brittle.

Can you use parchment paper when making peanut brittle? ›

You will want the cookie sheet to be non-stick. Use parchment paper, a silicone baking sheet or a greased cookie sheet. Spread the peanut brittle as thin as you can. Immediately add your sea salt.

Can I freeze homemade peanut brittle? ›

Can You Freeze Peanut Brittle? Yes! You can freeze peanut brittle for up to three months, but it will slightly alter the texture.

How do you know when brittle is done? ›

Stir and cook over a medium flame until a candy thermometer reaches 240º F. If you do NOT have a thermometer, here's what you do. Take a very small cup of cold water and drop a bit of the mixture in. If it dissolves into the water, it's not ready.

Why is my peanut brittle so thick? ›

Not spreading the mixture thinly enough: If the peanut brittle is too thick (usually because you used too small of a pan), it may not cool and harden properly. Be sure to spread the mixture as thinly as possible in the pan. 4. Humidity: Humidity can affect the hardening process of the peanut brittle.

Why is my peanut brittle too thick? ›

As mentioned in “how to make peanut brittle”, it's very important to move fast after the peanuts and baking soda are mixed in. If not, the peanut brittle will turn out too thick and clumpy. Don't play the guessing game and use a candy thermometer instead. This will ensure your peanut brittle turns out perfectly golden.

When to add baking soda to brittle? ›

Just like in my favorite english toffee recipe, this homemade peanut brittle recipe calls for 1 teaspoon of baking soda to be added right at the end of the cooking process. This is important because of a chemical reaction that results in the perfect peanut brittle texture.

What is the purpose of baking soda in candy making? ›

Baking soda helps to aerate brittle — it literally makes the molten candy bubble in the pot — to create a brittle with an airy, almost honeycomblike texture that crunches easily when eaten.

What does baking soda do when making candy? ›

When the baking soda combines with the boiled sugar, it creates Carbon Dioxide that form lots of bubbles and puff the candy up. Once it hardens, the bubbles get trapped inside and create a texture that looks just like a sponge or piece of foam. It's crunchy and sweet, with an almost molasses-like flavor.

Top Articles
Latest Posts
Article information

Author: Dong Thiel

Last Updated:

Views: 5807

Rating: 4.9 / 5 (59 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Dong Thiel

Birthday: 2001-07-14

Address: 2865 Kasha Unions, West Corrinne, AK 05708-1071

Phone: +3512198379449

Job: Design Planner

Hobby: Graffiti, Foreign language learning, Gambling, Metalworking, Rowing, Sculling, Sewing

Introduction: My name is Dong Thiel, I am a brainy, happy, tasty, lively, splendid, talented, cooperative person who loves writing and wants to share my knowledge and understanding with you.