FAQs
directions
- Combine sugar, milk, butter and salt in a medium sized saucepan. Bring to a boil, cook 5 minutes, stirring constantly.
- Add in chocolate chips; cook until melted.
- Remove from heat; stir in marshmallows, vanilla and nuts. Mix well.
- Pour into a 8-inch pan. Cool cut into squares.
Why won't my 2 ingredient fudge set? ›
The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.
How do you make homemade fudge firmer? ›
Harden the fudge: Place your container or tins in the fridge for 2 hours, which is the time it takes for the fudge to set. Once it's hardened, cut the fudge into 12 pieces or remove it from the muffin tins. Store in the fridge or the freezer (if you don't devour it right away).
Why did my fudge turn out like taffy? ›
If the temperature is too low, the fudge will be too soft and sticky, and if it's too high, it will turn into a hard, crumbly mess. The ideal temperature to cook fudge is between 232-234 degrees F (111-112 degrees C).
Is fudge caramel? ›
What is fudge? While caramel usually contains just one key ingredient, fudge is made from a perfectly balanced mixture of sugar, butter, and milk. Plus, it's not heated as high — around 115 degrees Celsius.
How to fix fudge that didn't set? ›
To fix it, you can reheat the fudge mixture over low heat and continue cooking until it reaches the proper temperature. Be sure to use a candy thermometer to monitor the temperature accurately. Alternatively, you can try to salvage chewy fudge by mixing it into ice cream or using it as a topping for desserts.
What to do with failed fudge? ›
OPTION 1) Depending on how runny it is, you can either use it as a frosting for cakes, or a sauce for ice-cream. OPTION 2) Freeze it overnight. Cut it into squares. Cover each square thickly in melted chocolate, ensuring no part of the fudge is exposed.
Why won't my 3 ingredient condensed milk fudge set? ›
This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool. Heat in 30-second bursts in the microwave, stirring well between each to ensure everything is melting evenly.
What is the secret to perfect fudge? ›
The key to creamy, luscious fudge is controlling crystal formation. If the sucrose (table sugar) crystals are small, the fudge will feel creamy and smooth on your tongue. But if the crystals are large, the fudge develops a crumbly, dry, or even coarse texture.
Do you stir fudge when it's boiling? ›
Brush the sides of the pan with a wet brush at the beginning of cooking to dissolve sugar crystals stuck to the sides. Never stir the mixture during cooking or sugar could crystallize again. The mixture may seize and become grainy. Use a candy thermometer or conduct a cold water test to check if the fudge is done.
Once a seed crystal forms, it grows bigger and bigger as the fudge cools. A lot of big crystals in fudge makes it grainy. By letting the fudge cool without stirring, you avoid creating seed crystals.
Can you over beat fudge? ›
Beating the cooled batter is one of the crucial steps of fudge-making, but overbeating can turn fudge hard as a rock. Pay close attention to the change in appearance and only beat the fudge until it loses its glossy sheen.
Can you reboil fudge? ›
OMG My fudge is grainy, what do I do? -
Pop the grainy fudge back into the pan along with some water and a little cream and melt the fudge back down to a liquid and re-boil it to temperature. Heat slowly to begin with and make sure the mixture goes completely smooth before bringing it to the boil.
What should fudge look like after beating? ›
The fudge is then beaten as this makes the fudge slightly crumbly rather than chewy. Beating the mixture encourages the formation of small sugar crystals, which leads to the crumbly texture. The crystals may not be noticeable in themselves but the fudge mixture will thicken and turn from shiny to matte in appearance.
What is the secret to good fudge? ›
You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).
How do I get my fudge to harden? ›
Fudge Didn't Set
If your fudge turned out super sticky, or it didn't set as it cooled, it probably never got hot enough. This mistake is super easy to avoid if you use a candy thermometer and cook the fudge to the temperature specified in the recipe (usually between 234 and 239°F).
What is the softball method fudge? ›
Those who have dealt with sugar cookery and candy making in the past will recognize 235°F (113°C) as the bottom of the “softball” stage. This means that a drop of syrup at this temperature when dropped into a glass of cold water will form a ball that can be smashed between the fingers.
What makes fudge softer? ›
If you don't heat your fudge to a high enough temperature, you'll end up with a soft product. And if you heat the mixture too much, your fudge may be harder than you'd like.